13-STAGE WATER FILTRATION

10-Stage Profile. Multiple layer prefilter smaller than 0.5 micron.

Stages 1 – 5
The water passes through the five membranes that initially remove from the water the particles of larger diameter and then those of smaller diameter, such as soil, various sediments, mud, etc.
Stages 6 – 10
0.5 Micron
Then it passes through five new membranes that remove rust, dirt, mud, turbidity, asbestos fibers, iron sulfate, manganese particles and other pollutants, as well as pathogenic microorganisms.
Unique quality medical grade activated carbon of maximum effectiveness with natural membranes of 0.1 micron.
Stage 11
The water passes through the specially treated, medical grade carbon with an absorption capacity equal to 700,000 square meters and thus it removes effectively both organic and inorganic contaminants, such as pesticides, residual chlorine, trihalomethanes, lead and any other contaminant.
This medical grade activated carbon is the most expensive one available and of the highest quality. It is produced in an Island of Hawaii exclusively for our factories in the USA.

ULTIPOR, N66™
Special membranes of 0.1 Micron
Final Filtration
Stage 13
Two special membrane high quality filters of 0.1 Micron function for the final filtration and are specially designed to completely remove 100% of pathogenic microorganisms from the water, such as typhoid, dysentery, salmonella etc.

13-STAGE FILTERING GUARANTEE CLEAN HEALTHY WATER

The 10-stage prefiltration are made with pores of less than 0.5 Micron so as to trap large particles in the outer layers and the smaller ones in the inner layers.

This ensures excellent capacity to trap dirt, mud, rust, turbidity, asbestos fibers, iron sulfate, manganese particles, pathogenic microorganisms (their smallest diameter is 0.7 Micron) etc.

The specially made medical grade activated carbon provides the 11th stage of filtration. To ensure its high efficiency, it has been designed specifically to remove harmful trihalomethanes (TTHMs).

The high quality of medical grade activated carbon also removes effectively various variable organic chemicals, as well as the harmful inorganic chemicals, such as lead.

Even more important is the fact that it effectively removes all residual chlorine.

The ULTIPOR, N66™ 0.1 Micron membranes provide the final filtering stage, removing completely 100% of pathogenic microorganisms from our water.

The material that are used to make the water filtering system IMPERIAL MAXIMUM CLUB WATER SYSTEM are natural and approved by the US Food and Drug Administration (FDA).

The results of various experiments that were collected from official bodies and authorities for the proper operation of the device are published in this issue.

In addition, other official results are always available for you by the International Health Organization Camelot.